DUO#DustCollect® Centrifugal Dust Collector – Robust Preliminary Separation for Paper Particles and Large Dust Particles

Efficient cyclone separation for high air volumes and coarse particle fractions – reduces filter loading and increases the operational reliability of your extraction system.

• Request a consultation 

DUO#DustCollect® centrifugal separators are used wherever coarse particles, paper scraps, or large amounts of dust need to be reliably removed from industrial air streams. Especially in corrugated cardboard and paper processing, they serve as robust pre-separators upstream of downstream filter systems.
Due to their purely mechanical operation, cyclone separators exhibit low wear and are ideally suited for applications involving high air volumes and coarse dust fractions. They reduce the load on downstream filter stages, extend maintenance intervals, and contribute to stable, economical plant operation.

The DUO#DustCollect® centrifugal collectors operate according to the proven cyclone principle. The dust-laden air stream is fed tangentially into the collector and set in a rotating motion. The resulting centrifugal forces press heavy particles and paper scraps outward against the housing wall and separate them downward into the collection container.
The cleaned air then flows out of the separator through the central air outlet. Since no filter media are used, particle separation is purely mechanical and requires very little maintenance.
This robust operating principle is particularly suitable for coarse dust fractions and high air volumes in industrial extraction systems.

• Reliable separation of paper particles and coarse dust
• Ideal for high air volumes
• Purely mechanical operating principle without filter media
• Very low maintenance and wear requirements
• Significantly reduces the load on downstream filter systems
• High operational reliability in continuous operation
• Easy integration into existing extraction systems

By using it as a pre-separator, you extend the service life of your filter technology and improve the overall cost-effectiveness of your extraction systems.

• Corrugated cardboard production lines and inliners
• Cross-cutters and slitters
• Extraction of paper scraps
• Pre-separation before filter systems
• Centralized extraction systems with high air volumes

The centrifugal separator represents a cost-effective and reliable solution, particularly for applications involving coarse particles.

The DUO#DustCollect® centrifugal dust collectors are available in a range of sizes and are customized within these models to match the air volume and system layout.
Typical design ranges:

• Air volume: approx. 4,000 – 16,000 m³/h
• Particle range: coarse dust fractions and paper scraps
• Separation principle: mechanical centrifugal separation
• Filter media: not required
• Integration: central or decentralized installation possible
• Retrofit capability: yes

Retrofitting of FKA systems to FKAplus is possible; additional configurations available upon request.